EN
1. Dual-operation configuration with both shovel and digger buckets, offering a 1.3m³ shovel bucket capacity and a 0.3m³ digger bucket capacity, balancing loading and digging efficiency;
2. Powerful 76KW turbocharged engine with a maximum speed of 30km/h for flexible site movement, and a minimum turning radius of only 3660mm, suitable for confined spaces.
1. Compared to other models in its class, it has a total weight of 7.2 tons but a payload of 2.5 tons, offering a superior load-bearing ratio;
2. Optional telescopic boom (5000-5500mm digging depth), providing a wider working range than fixed-boom competitors;
3. System pressure of 16MPa, digging force of 38KN, and thrust of 39KN, delivering superior working performance compared to most models of the same specifications.
Technical Parameter
| Total operating weight | 7200Kg |
| Length*width*height(mm) | 7600x2260x2900 |
| Wheel base | 2250mm |
| Axle track | 1700mm |
| Minimum ground clearance | 300m |
| Loading bucket capacity | 1.3m³ |
| Digging up capacity | 38KN |
| Loading lift capacity | 2500Kg |
| Bucket discharge height | 2742mm |
| Bucket discharge distance | 1062mm |
| Backhoe bucket capacity | 0.3m³ |
| Backhoe discharge height | 3878mm |
| Maximum digging depth | 4000mm |
| Optional Digging Depth | 5000mm-5500mm（Digging boom telescopic） |
| Bucket slewing angle | 180° |
| Bucket stick revolving radian | 180° |
| Maximum puling force | 39KN |
Engine
| Model | YUNNEI YN38GBZ turbo engine |
| Type | Inline, direct injection, four-stroke, liquid cooled |
| Rated Power | 76KW |
| Optional engine | Euro V 4G33TC-75L Changchai 55.2KW |
| EPA4/Euro V Kohler KDI2504TCR Engine 55KW | |
| EPA4 Cummins 55KW Engine QSF2.8 EPA4 Cummins QSF3.8 | |
| 75KW Cummins 4BT3.9-C100 Yuchai YCF36100-S500 Euro V 74KW |
Steering System
| Type | Articulated hydraulic steering |
| Steering Angle | 36° |
| Min. turning radius | 3660mm |
| Pressure of the system | 16Mpa |
Transmission system
| Torque converter | 280 |
| Type of gearbox | Fixed shaft power shift transmission |
| Gear | 2gears ahead,2gears reverse |
| Maximum speed | 30KM/H |
Drive axle
| Drive type | Four-wheel drive |
| Wheel reduction type | Single stage planetary type |
Tire
| Tire size | 16/17-20 |
| Front wheel pressure | 0.22Mpa |
| Rear wheel pressure | 0.22Mpa |
Brake System
| Service braking | Air over hydraulic caliper disc brake parking |
| Emergency brake | Flexible shaft operated disc brake |
Hydraulic System
| Pressure of Hydraulic System | 22Mpa |
| Packing Quantity（1*40HC） | 2Units(Tire removal / boom / bucket) |
Note: The parameters or configuration are subject to change without notice.
This is a WZ30-25 backhoe loader, integrating loading and digging functions, suitable for various operations such as engineering construction and site preparation.
Its total weight is 7200kg, with compact dimensions (7600×2260×2900mm), a wheelbase of 2250mm, and a track of 1700mm. Equipped with articulated hydraulic steering, it has a minimum turning radius of 3660mm, allowing for flexible maneuverability in confined spaces. The bucket capacity is 1.3m³, and the digging bucket capacity is 0.3m³. The front shovel unloading height is 2742mm, and the unloading distance is 1062mm; the rear digging bucket unloading height is 3878mm; and the maximum digging depth is 4000mm (optional boom extension to 5500mm). Both the shovel and digging buckets can rotate 180°, providing a wide operating range.
In terms of power, it is equipped with a turbocharged engine with a rated power of 76KW, matched with a fixed-shaft power shift gearbox (two gears in the front and two gears in the rear), with a maximum speed of 30km/h and high transfer efficiency; the system pressure is 16Mpa, the digging force is 38KN, and the maximum thrust is 39KN, which can efficiently complete loading, digging, bulldozing and other operations, while the load capacity is up to 2500kg, which can meet the transfer needs of most materials.